Guangzhou, Guangdong Province, China
Everflorae Artificial Plants & Trees
Home›Blog›What Is the Best Artificial Ficus Tree for a Restaurant?

What Is the Best Artificial Ficus Tree for a Restaurant?

The best artificial ficus tree for a restaurant is an umbrella or multi-trunk form of 2.4–4.5 m sized to the dining-room ceiling — keep roughly half a metre between the canopy top and the ceiling — in matte two-tone ABS and PU foliage that wipes clean of kitchen grease, with fire reports issued per order to NFPA 701, BS 5867 or EN 13501-1. Samples start from one unit; standard trees take 7–15 days, custom builds 20–45 days.

November 9, 2026 · Restaurants, Cafés & Bars · 8 min read · By

Full-canopy artificial ficus tree standing between dining tables in a restaurant
A ficus canopy over a working dining room — the silhouette and the clearance above the tables are both factory decisions, made before the tree ships.
Key takeaways
  • Ficus suits dining rooms because it holds a dense, fine-leafed canopy without daylight, irrigation or soil — nothing drops onto plates and nothing attracts pests.
  • Size to the ceiling: 2.4–3.2 m umbrella forms for typical dining ceilings; 3.8–4.5 m multi-trunk builds (HXDRS001 / HXDRS005) for entrance and bar-back statements.
  • Matte two-tone ABS and PU foliage wipes clean of kitchen grease and photographs well under low pendant lights.
  • Fire paperwork is the sign-off gate: NFPA 701, BS 5867 or EN 13501-1, report issued per order and naming the material tested.
  • Sample from one unit, volume from ten; standard trees 7–15 days, custom 20–45 days.

Why a ficus tree works in a dining room

A restaurant is the hardest room in hospitality to keep a live tree alive, and the reasons are structural rather than care-related. The air near an open kitchen is hot, greasy and moving; pendant lighting replaces the bright, even light a real ficus (Ficus benjamina) demands; and between lunch and dinner service the room sits in half-darkness. A live ficus responds by thinning its canopy and dropping leaves — onto tablecloths, into plates, across the floor between tables.

An artificial ficus removes the failure modes that matter to a restaurant operator. It holds its foliage density permanently, so the tree that photographed well on opening night still looks the same a year later. It carries no soil and no standing water, so it is not a harbourage for fungus gnats or fruit flies — the kind of detail a hygiene inspection notices. It needs no irrigation line, which matters in a dining room where every floor penetration and water point competes with seating capacity. And the cleanup problem shrinks to dusting and wiping, tasks the existing evening cleaning shift absorbs without a plant-care contract.

What is the best artificial ficus tree for a restaurant?

Catalogue builds run 3–8 m tall with old-growth canopies up to 12 m wide, and any height is engineered to drawing across a 1–15 m range. Most dining rooms sit well below that — finished ceilings of 2.7–3.2 m are the norm — so the practical answer is a tree specified to the ceiling, not a specimen chosen from a photo. Four positions cover most restaurant briefs:

Position in the roomTree heightCanopyForm
Banquette or booth divider1.6–2.0 mBuilt to drawingCompact umbrella, canopy kept clear of seated guests
Dining floor accent2.4–3.2 m2–3 m, built to drawingSingle-trunk umbrella
Entrance or bar-back statement3.8–4.5 m3.5 mMulti-trunk (HXDRS001, 3.8 m / 3.5 m; HXDRS005, 4.5 m / 3.5 m)
Terrace or sheltered courtyard3–4.5 mBuilt to drawingOutdoor-grade UV foliage, 3–5 year fade resistance

Two clearances decide whether the tree works in the room. The vertical one: keep roughly half a metre between canopy top and ceiling so the foliage can be dusted without dismantling — a 3.2 m tree therefore wants a finished ceiling of about 3.7 m. The horizontal one: the canopy must clear every route a guest walks and every route a server carries through, and the planter footprint must sit outside the chair pull-out zone — if a guest can knock the trunk with a chair back, the planter is too close. State ceiling height, table layout and the fire standard in the enquiry, and the form and size are settled before a production drawing is issued.

Which construction details matter in a restaurant?

The trunk is a fibreglass core — steel where canopy load demands it — finished in moulded or natural bark and built in bolt-together segments. In a restaurant that detail is about installation, not structure: the segments pass through the service door and the service lift, and the tree assembles in place overnight, between lunch close and dinner open, with the joint lines hidden under the foliage. A full-canopy tree that arrives as one piece needs a crane and a closed dining room; a segmented one needs two fitters and an evening.

Foliage is injection-moulded ABS and cast PU, specified matte and two-tone — darker on top, lighter underneath. The matte finish earns its place in a dining room: pendant and spot lighting in restaurants sits low and warm, and glossy leaves flash highlights across photographs of the table. The smooth moulded leaf surface also wipes clean — kitchen grease aerosol deposits a film on foliage near the pass, and a damp cloth with neutral soap takes it off, while solvent-based cleaners are the thing to avoid because they dull the finish. If part of the tree stands in the sun patch of a glazed facade or terrace, UV-stabilised grades hold colour 3–5 years in outdoor-equivalent exposure, so one side of the canopy does not fade ahead of the rest.

Multi-trunk artificial ficus tree under final assembly in the production workshop
A multi-trunk build in the workshop: trunk segments, hand-set foliage and the numbered packing that lets the tree assemble overnight between services.

The base follows the floor and the traffic. A cement-filled base keeps a freestanding tree stable against chair knocks on the dining floor; a steel-plate base disappears inside a decorative planter matched to the FF&E schedule; a bolted plate fixes the tree where the operator requires it. Send the floor plan with the enquiry and the base is engineered to the build-up — one less surprise during fit-out.

What fire documentation does a restaurant need?

Dining areas are assembly occupancy served by defined escape routes, and greenery on those routes normally falls under local fire code — the one item where an undocumented product stops a restaurant sign-off. Name the standard, not the adjective: NFPA 701 for US-referenced projects, BS 5867 Part 2 for UK curtain-grade fabric, EN 13501-1 for EU reaction-to-fire classification.

The report survives review when it is issued per order and names the standard, the edition and the material actually tested — a certificate that says only “flame retardant” documents nothing. Because fire treatment is a production step on the goods, the report arrives with the order, and one complete file answers the fire officer, the designer and the insurer. One positioning note belongs in the same conversation: keep the canopy out of the sprinkler envelope, and let the project fire engineer set the clearance below heads before the tree is placed.

How does the specification change for a shopping mall?

The best artificial ficus tree for a shopping mall follows the same species logic at a larger scale: 3.8–4.5 m multi-trunk builds at atrium edges and mall entrances, and the 8 m tall / 6 m canopy old-growth form (HXDRS006) under double-height atrium volumes, with canopies up to 12 m where the space allows. Three things change compared with a single restaurant. Mall design review is formal — expect to submit the 3D render and a sample before approval. The fire file is set by the mall, not the tenant — the facility management office usually specifies which standard common-area greenery must document, and the per-order report is written to it. And the cleaning regime runs on mall hours: common-area foliage near food-court tenancies needs the same grease-wipeable matte finish, cleaned on the mall’s night-shift cycle rather than a restaurant’s.

Installation moves to night windows after trading hours. The trees ship as bolt-together segments with foliage packed and numbered — a 10 m tree typically packs into 2–4 cartons — and a written installation sequence keeps the crew inside the window. See the artificial ficus and banyan tree specifications for the full size range and forms.

How does ordering and lead time work?

Sampling starts from one unit: send a render, a CAD drawing or a dimensioned photo and the engineers return a production drawing and a 3D render; production starts only after approval. Volume orders run from ten units per height. Standard catalogue trees take 7–15 days to produce; custom builds — a specific height, canopy or form — take 20–45 days including drawing approval, plus freight.

The quotation comes back with the spec sheet, unit price and lead time — usually within 24 hours on business days — when the enquiry states four things: ceiling height, quantity, installation environment and the fire standard the project references.

Frequently asked questions

What is the best artificial ficus tree for a restaurant?

An umbrella or multi-trunk form of 2.4–4.5 m sized to the dining-room ceiling, in matte two-tone ABS and PU foliage. For entrance and bar-back positions the reference builds are HXDRS001 (3.8 m tall / 3.5 m canopy) and HXDRS005 (4.5 m / 3.5 m). Fire reports are issued per order to NFPA 701, BS 5867 or EN 13501-1, sampling starts from one unit, and standard production takes 7–15 days.

How much ceiling height does a restaurant ficus tree need?

Plan roughly half a metre between the canopy top and the ceiling so the foliage can be dusted without dismantling — a 3.2 m tree wants a finished ceiling of about 3.7 m. For typical 2.7–3.2 m dining ceilings, a 2.4–2.8 m umbrella form is the usual answer. Heights are built to drawing across a 1–15 m range, so lower ceilings get a compact form rather than a compromise.

How do you clean an artificial ficus tree in a restaurant?

Dry-dust the canopy on the weekly cycle and wipe the leaves with a damp cloth and neutral soap monthly — more often near an open kitchen, where grease aerosol deposits a film. The smooth moulded ABS surface wipes clean without disassembly; avoid solvent-based cleaners, which dull the matte finish. For a full regime, see the commercial artificial tree cleaning guide.

Is the same ficus tree suitable for a shopping mall?

Yes — the same species logic at a larger scale: 3.8–4.5 m multi-trunk builds at atrium edges, the 8 m / 6 m old-growth form under double-height volumes, and canopies up to 12 m where space allows. The differences are procedural: the mall sets the fire standard for common-area greenery, design review requires renders and a sample, and installation runs in night windows after trading hours. Lead times are unchanged: 7–15 days standard, 20–45 days custom.

Sources & attributed quotations

Quotations are verbatim from the issuing bodies, with links to the official pages.

“This standard establishes test methods to assess the propagation of flame of various textiles and films under specified fire test conditions.”

— NFPA (National Fire Protection Association), NFPA 701, Standard Methods of Fire Tests for Flame Propagation of Textiles and Films (2023 edition), official source

“This document provides the reaction to fire classification procedure for all construction products, including products incorporated within building elements with the exception of power, control and communication cables which are covered by EN 13501-6.”

— CEN (European Committee for Standardization), EN 13501-1, Fire classification of construction products and building elements — Part 1: Classification using data from reaction to fire tests, official source

Related pages

Specifying a ficus tree for a restaurant?

Send the ceiling height, the table layout, the fire standard and the opening date. We will come back with a form, a size, a base detail and a lead time — normally within 24 hours on business days.